🧰 iContractor Toolbox
Professional contractor calculators, coating estimators, technical data sheet references and project resources.
Pool Surface Area Calculator
Calculate empty pool surface area, pool volume, estimated coating quantity, tins required and DFT-based spread rate.
Rectangular
Round
Oval
Contractors must confirm surface condition on site.
m² per litre/kg per coat from TDS
Most coatings are supplied in minimum 5L tins.
Steps, seats, benches or unusual shapes in m²
From TDS. Optional DFT calculation.
Dry Film Thickness from specification.
DFT is critical in coatings. Theoretical spread rate depends on volume solids and required dry film thickness. Always confirm DFT, WFT and coverage from the product TDS.
Additional repairs can only be assessed by the contractor on site. Cracks, hollow plaster, loose marbelite, osmotic blistering, poor adhesion and unknown existing coatings must be inspected before quoting.
Estimated Results
Floor Area0 m²
Wall Area0 m²
Extra Area0 m²
Total Surface Area0 m²
Pool Volume0 L
DFT Spread RateNot entered
Total Coated Area0 m²
Material Required0 L/kg
Recommended Purchase0 tins
Total Purchased0 L/kg
Estimated Material Cost
R0.00
Important: This calculator provides an estimate only. It does not replace a site inspection, TDS, SDS, manufacturer specification or contractor judgement. Contractors must verify existing coatings, surface condition, moisture, cracks, adhesion, compatibility and repairs before quoting.